More Pumps and Plumbing
|
|
|
A close up of plumbed pump box. I will use this pattern on all 3 pumps. 2" line in and out with ball valves, also 2- 2" vents 1 behind fan on pump motor and one high at the other end for hot air to exit. |
|
|
This is the first compleat circuit of line back to the pond! Horray!! I plan to use this medical bypass to keep water moving this winter so as to avoid freezing. the slope from the pond will cover all of this.
|
|
|
8500 GPH through this 4" Medical Bypass
The clean out facing up is so I can drain the bypass when not in use to keep it from going anerobic. |
|
|
3 way valve for each pump
I was amazed I got all this to fit well without any flexible pipe. You can see the abs inlet vent pipe in this pic.
|
|
|
Skippy lines w/ check valves
This is as far as the skippy will get for a while but both pumps are plumbed to the pond. And the exquigable Boo Beast. |
|
|
waterproof I hope
Fully plumbed pump boxes and waterproofed 3 way valves. Ready to be buried on turkey day +1
|
|
|
Pair of pumps in a box
In the box, Sequence 6000PRM and a beckett condensate pump for dewatering. Hope one runs all the time and the other never! |
